DIMAX TYTON XTREME Z+ is corrosion resistant, high strength ductile iron paired with AC calcium aluminate cement (CAC) and DIMAX Z+ Coating for resistance against aggressive fluids with a high pH value, sewage and industrial waste. DIMAX Z+ Coating extend the service life of your pipe and reduces on-site handling by erasing the need for sleeving.

AT A GLANCE
DIMAX XTREME Z+ is available from DN100 to DN750 in PN25/30, PN25 and flange class. Manufactured to AS2280, TYTON XTREME Z+ is WSAA appraised and approved. CAC is recommended for sulphate levels up to saturation for continuous pH values down to 4 and for hydrogen sulphide levels up to 10mg/L.

SPECIFICATIONS
Manufactured to AS2280
WSAA Appraised and Approved
Pressure classes PN20 & PN35
Lining

Calcium Aluminate Cement (CAC) (as specified in AS/NZS 2280) is recommended for sulphate levels up to saturation for continuous pH values down to 4 and for hydrogen sulphide levels up to 10mg/L.

Coating

Red Two Part Epoxy Coating at 100µm

FEATURES
Corrosion resistant
Chemical resistant
Abrasion resistant
Can be installation in any weather conditions
No need for polyethene sleeving
Self-healing external layer
Saves time and money
Withstands water hammer surges, cyclic stresses, unpredictable traffic and soil loads (PN35 only)
DIMAX Z+ Coating testing covered by ISO9001
Coating: Hot Metallic Zinc Spray at 200GSM, Red Synthetic Resin Coating at 100μm, Epoxy applied to internal Socket profile and Spigot
H2S limit mg/L: < 10
Continuous exposure pH limit: >= 4.0
Cement Sulphate limit mg/L (CAC to EN14647): No limit with the exception of the 6 hour strength requirement as specified in AS/NZS2280

Australia's leading water network solutions provider for 120+ years. Big enough to make a difference, small enough to care — always recommending the right product.   Read More >