DIMAX TYTON XCEL

DIMAX TYTON XCEL

0.00
  • 21 Frank St, Wetherill Park, Fairfield Region, NSW 2164 - Australia
  Share
  Buy Now

 

DIMAX TYTON XCEL
DIMAX TYTON XCEL is a high strength, easy to design cement-lined ductile iron pipe. Synonymous with the introduction of pressure class DI pipe into Australia, DIMAX XCEL is manufactured to AS2280 and AS4020, making it suitable for potable water, raw water, irrigation and bore water pipelines above and below ground. Exclusively featuring with the TYTON® push-fit joint, making XCEL to be easily installed. Available with DIMAX Z+ Coating.

AT A GLANCE
DIMAX XCEL is available from DN100 to DN750 in PN25/30 and PN35, providing peace of mind against water hammer surges, varying soil and traffic loads, cyclic stresses and unforeseen rigors of a pipe system. Seal Coat can be applied to cement lining surface to inhibit the leaching of lime where aggressive, soft waters of low hardness (total alkalinity <30mg/L) or high dissolved CO² are being conveyed.

SPECIFICATIONS
Manufactured to AS2280

Water Contact Approval to AS4020

WSAA Appraised

Pressure Classes PN35 & PN30/25

DIMAX XCEL is capable of satisfying your needs for the following applications, above or below ground:

Potable water

Raw water

Irrigation

Bore water

Lining

Sulphate Resisting Blast Furnace Slag Cement

Seal Coat over Cement lining is available as an option

Coating

Hot Metallic Zinc Spray at 200GSM

Black Two Part Epoxy Coating at 100µm

FEATURES
Damage resistant
Critical buckling resistant
Easy to design and specify
Can be laid in narrow/shallow trenches
Suitable for wide range of depths
No Long term reduction in pipe stiffness
Ductile Iron compensates for unforeseen environmental changes
Minimises on-site Damage
Ductile Iron compensates for unforeseen environmental changes
Centrifugally spun Type SR (sulphate resisting) Cement mortar lining
Long design life
WSAA Approved

Sign in with Email
Top4 - Made in Australia with Love
Stay In Touch