Keep Electrical Powerpoints From Being Overloaded

Keep Electrical Powerpoints From Being Overloaded


 


Since everything we use these days runs on electricity, most homes have multiple power outlets and/or power boards in every room that are used constantly. But is it safe and do you have enough powerpoints to support your electrical needs? This is why you should always exercise extreme caution whenever you’re dealing with electricity. Never overload your electrical powerpoints.

PROFESSIONAL ELECTRICIAN IN BRISBANE & SURROUNDING SUBURBS

If you’re searching for the best licensed electrician in the Brisbane area and surrounds (Alderley, Ashgrove, Bardon, Newmarket, Paddington, Stafford, The Gap), look no further than Allyn White Electrical.


These days, we demand a lot from our powerpoints with more and more appliances that we use in our homes on a daily basis. Not only is it unsightly (that's why they're behind the sofa, right?), it can pose a dangerous hazard as well.

Above lighting

What Is an Electrical Powerpoint Overload?

Electrical power points and electrical circuits are designed to handle a limited amount of electricity. Circuits are made up of wiring, a breaker (or a fuse, in old wiring systems), and devices (such as light fixtures, appliances, and anything plugged into an outlet). The electricity usage of each device (when running) adds to the total LOAD on your PowerPoint and the circuit. Exceeding the rated load for the circuit wiring causes the circuit breaker to trip, shutting off the power to the entire circuit.

Above lighting

How To Spot A Circuit Overload

Every household’s meter box contains a series of overload protection devices, which are designed to cut power to particular circuits when the amperage has been exceeded. Generally, the two main devices are fuses and circuit breakers.
The most obvious sign of an electrical circuit overload is a breaker tripping and shutting off all the power. Other signs can be less noticeable:

Above lighting

• Dimming lights, especially if lights dim when you turn on appliances or more lights.
• Buzzing outlets or switches.
• Outlet or switch covers that are warm to the touch.
• Burning odours from outlets or switches.
• Scorched plugs or outlets.
• Power tools, appliances, or electronics that seem to lack sufficient power.

If a fuse or circuit breaker blows or trips in your meter box, then it usually means there is a problem with the circuit. This can cause an electrical overload that can lead to major electrical problems.

How To Protect Your House Against An Overload Electrical Circuit


Never Piggyback On Too Many Appliances

Many older style homes have only one or two power points per room, so the temptation is to plug in a double adaptor or power board to increase the number of outlets. This is quite acceptable, providing they are used in moderation.

The problem occurs when people piggyback one double adaptor on top of another or plug double adaptors into power boards and even power boards into power boards. This is guaranteed to exceed the circuit’s amperage and is a house fire waiting to happen.

Above lighting

The alternative is to only use appliances one or two at a time, to turn appliances off or unplug them when not in use, or ideally to have an electrician install another PowerPoint in the room.

Know Your Electrical System

Your home’s electrical system is potentially more complicated and dangerous than you realise.
The best way to avoid overloading your power circuit is to know what circuits run through which part of the house and what powerpoints belong to which circuit. This way you can easily avoid demanding too much from your power circuits.

Above lighting

Familiarise yourself with the location of your power meter, fuse box and switchboard. But most importantly, if you are ever concerned or have any electrical problems in Brisbane, let a licensed electrician like Allyn White Electrical to take care of it and never try to do any electrical DIY works yourself.

Have Electrical Items Tagged And Tested

At Allyn White Electrical we also offer (test and tag) tagging and testing services and will test your power boards and portable electronic equipment. We will also look for noticeable damage and will perform electrical tests to look for polarity, earth resistance, leakage current and insulation resistance. We will then tag them to confirm their safety.

Above lighting

Organise An Electrical Safety Inspection

Organise for an electrical inspection with Allyn White Electrical to check on load levels which is the best way to protect against overload. As a licensed electrician and electrical contractor, Allyn White Electrical will also be able to suggest an electrical design solution that best suits your needs and prevents you from having to resort to unsafe methods of powering your appliances.

Contact a Licensed Electrician in Brisbane for Your Home Electrical Maintenance, Repairs and Installations

Best Brisbane electrician | Allyn White Electrician

Installation, repairs, upgrades, lighting advice for your home and outdoor spaces. No matter what your home renovation plan calls for, you can trust Allyn White.

With over 45 years of experience in all aspects of domestic, industrial, commercial and emergency electrical work, Allyn will be able to assist with your electrical problems in Brisbane.

For a free quote by a licensed electrician call 0416 235 641 to arrange a time to discuss your electrical needs.

Our charge out rate remains the same during the week, weekends and after hours, so don't hesitate to contact us today!

Source: platinumelectricians.com.au, thespruce.com, gordonpowers.com.au, fusecontracting.com.au, peakvoltage.com.au

Keywords

#electrical
#electrical powerpoints
#overloaded electrical powerpoints
#overloaded powerpoints
#electrical circuit
#overloaded electrical circuit
#keep electrical powerpoints from being overloaded
#never overload your electrical powerpoints
#electrical powerpoint overload
#circuit overload
#overload electrical circuit
#electrical overload
#electrical problem
#electrical appliances
#electrical system
#tagging and testing electrical items
#tagging and testing services
#electrical safety inspection
#electrical tips
#electrical service
#electrician
#allyn white electrical
#allyn white brisbane
#electrical contractor
#best electrician in brisbane
#best electrician in bardon
#best electrician in paddington
#brisbane electrician
#bardon electrician
#professional electrician near me
#electrical contractor bardon
#brisbane electrical contractor
#local electrician bardon
#alderley electrician
#ashgrove electrician
#best electrician in alderley
#best electrician in ashgrove
#best electrician in the gap
Sign in with Email
Top4 - Made in Australia with Love
Stay In Touch