Print Post - Learn How To Set Up an LED TV

About this post

Post Description:

LED-backlight LCD television, also known as LED TV, has become one of the hottest consumer electronics products in the market today. It has longer display life and lowers energy consumption compared to plasma TV. When buying one, one of the questions that you may ask is the setup instructions. Yes, it is important to know about the mounting techniques, cable connection, and some other essential set up steps. If you previously had an LCD or plasma television, you may not find any difficulties in setting up an LED unit. If you have never bought a flat screen television before, then you should continue reading this article. Below are the steps to set up an LED TV:

Like any flat screen televisions, you can either mount an LED TV on the wall, or put it on top of a table. Before setting up the television, it is essential for you to decide how and where you want to install it. You should also consider the location of the cables or electrical outlets. If you mount the television on the wall, then you need to run the cables inside the wall.

Connect your television to the cable, antenna or other transmission sources. Attach the coaxial cable to a port that is labelled "cable in" and connect the other end of the cable to the cable output. Then, you should also connect one end of the second cable to the output port which is labelled as "TV out" or "to TV". The next thing to do is to connect another end of the second cable to a port labelled "cable/antenna". Then you can plug the LED TV into the power source.

Now, you can put the batteries in the remote control. Switch on the TV and follow the instructions that appear on the screen. The television will ask you the current date and time, whether it is used in a home or an office, how it is mounted, etc.

Once you have finished the initial set up, then you can move to the more specific settings such as backlight adjustment, noise reduction, movie cinema mode, and so on. The setting options may vary between one television and another; you can read the manual book for further information.

Do you know that televisions still consume power even when it is not switched on? Although LED units use far less energy than other types of flat screen TVs, it would be better for the environment and your pocket if you unplug the cables when you're not using it. You should also provide separate switch if you use a DVR or TiVo.

Are you still having a hard time installing you LED TV or? You can hire AntennaPros, one of the best antenna specialists in Waterloo that can do the job for you.